General Characterization of Whey Protein Extracted through Various Techniques: A Comparative Analysis

Authors

  • Goudali Lina Hassan II University of Casablanca; Technical Center for Plastics and Rubber (CTPC)
  • Nagoor Basha Shaik Chulalongkorn University
  • Belouaggadia Naoual Hassan II University of Casablanca; Builders Ecole d’ingénieurs
  • Jammoukh Mustapha Hassan II University of Casablanca
  • Elfarissi Latifa Technical Center for Plastics and Rubber (CTPC)

DOI:

https://doi.org/10.4186/ej.2024.28.12.19

Keywords:

whey, protein, circular economy, waste valorization, food industry, recovery

Abstract

A significant quantity of waste is generated by food processing industries worldwide leading to severe environmental and social challenges. Within the milk processing industry, the coagulation of insoluble proteins results in the production of copious amounts of effluents. This latter yields liquid rich in soluble proteins known as whey proteins. Various techniques, including the use of organic solvents, heat treatment, and lyophilization, are employed to extract these proteins. The objective of this research is to compare the extracted substances obtained with the commercially available product. Fourier-transform infrared spectroscopy (FT-IR) is employed as the analytical technique in this study. The FT-IR spectra of the extracted whey proteins exhibit characteristic peaks similar to those reported in the literature and the commercial product. These findings validate the effectiveness of the utilized extraction methods, and further steps should be considered to enhance the yield and quality of the extracted material. The findings provided insights into the suitability and quality of the extracted substances, paving the way for improvements in the extraction process. By maximizing the utilization of waste streams from the food transformation industry, this research aims to contribute to resource optimization and sustainability in line with environmental and societal considerations.

Downloads

Download data is not yet available.

Author Biographies

Goudali Lina

Laboratory: Modeling and Simulation of Intelligent Industrial Systems (M2S2I), Higher Normal School of Technical Education of Mohammedia, Hassan II University of Casablanca, Morocco

Technical Center for Plastics and Rubber (CTPC), Complex of Moroccan Industrial Technical Centers, Route Ouled Haddou Boulevard 60, Sidi Maarouf 20280, Casablanca, Morocco

Nagoor Basha Shaik

Department of Mining and Petroleum Engineering, Faculty of Engineering, Chulalongkorn University Bangkok, Thailand

Belouaggadia Naoual

Laboratory: Modeling and Simulation of Intelligent Industrial Systems (M2S2I), Higher Normal School of Technical Education of Mohammedia, Hassan II University of Casablanca, Morocco

Unité de recherche « Builders Lab » ComUE NE, Builders Ecole d’ingénieurs, Campus de Caen, Epron, France

Jammoukh Mustapha

Laboratory: Modeling and Simulation of Intelligent Industrial Systems (M2S2I), Higher Normal School of Technical Education of Mohammedia, Hassan II University of Casablanca, Morocco

Elfarissi Latifa

Technical Center for Plastics and Rubber (CTPC), Complex of Moroccan Industrial Technical Centers, Route Ouled Haddou Boulevard 60, Sidi Maarouf 20280, Casablanca, Morocco

Downloads

Published In
Vol 28 No 12, Dec 31, 2024
How to Cite
[1]
G. Lina, N. B. Shaik, B. Naoual, J. Mustapha, and E. Latifa, “General Characterization of Whey Protein Extracted through Various Techniques: A Comparative Analysis”, Eng. J., vol. 28, no. 12, pp. 19-28, Dec. 2024.

Most read articles by the same author(s)